The cold roll forming machine consists of the hydraulic device of the cold rolling equipment and its associated conveying spokes and control devices. In addition, trolleys and roller conveyors can be installed on the left and right sides of the machine according to work needs. The console is removable and can be moved freely to a convenient workplace, all buttons are available for remote control and operation. When bending, you can view the contour line pre-painted on the steel plate, and operate the button to perform precise bending. Since the buttons are jog buttons, it will stop when the finger leaves the button. The transmission structure of the cold roll forming machine is gear box transmission. Each molded frame has a gearbox to ensure overtime, high strength operation and long life.
As the service life of the cold roll forming machine increases, it is inevitable that there will be problems with equipment aging and wear. This requires us to fully maintain the forming machinery and equipment of the cold roll forming machine to ensure the stability of its work and avoid mechanical problems caused by the cold roll forming equipment from affecting daily work. So how should the cold roll forming machine be maintained? What is the technical development of cold roll forming machine now?
1. The maintenance of the cold roll forming machine needs to be regularly maintained in accordance with the corresponding maintenance specifications. Even in good working order, maintenance and maintenance are required to prevent mechanical breakdowns and ensure smooth operation.
2. During the maintenance process of the cold roll forming machine, the severely worn parts must be replaced even if they are found to be worn. Regular maintenance personnel need to maintain the machinery, such as adding lubricating oil to prevent the equipment from oxidizing and rusting, mainly when it is idle for a long time. Doing meticulous maintenance work is very beneficial to the normal operation of the machine and can be carried out smoothly.
At present, the technical innovation of cold roll forming machine is mainly in the stage of absorption, imitation and integration, and there are few original innovations and independent innovations. Insufficient attention has been paid to basic research and technical research. The cold-formed steel equipment is simple, the technical equipment is backward, and the unit equipment is not matched. Existing production equipment is difficult to produce high-quality products with special requirements. Compared with ordinary steel structures, cold-formed steel has many special conditions, such as cold-bending effect, local buckling and super-buckling of plates, and material requirements. Therefore, there are many technical problems in this kind of structure that need to be further studied.
+86 0571 82686709
.jpg)
